ii
Product Use
All users must familiarise themselves with the following information.
This product is marked as CE compliant. This means that it complies with the relevant
European Directives for this product. In particular the Directives cover Low Voltage, EMC,
Machinery, Pressure and electronic waste disposal.
The equipment, when used in normal or prescribed applications and within the
parameters set for its mechanical and electrical performance, should not cause any
danger or hazard to health or safety.
If, in specific cases, circumstances exist in which a potential hazard may be brought about
by careless or improper use, these will be pointed out and the necessary precautions
emphasised.
This equipment is designed for use by students as part of the learning process who must
be under the supervision of a suitably qualified and experienced person in a laboratory
environment where safety precautions and good engineering practices are applied.
By the nature of its intrinsic teaching functionality, parts are visible and accessible that
might normally be covered up or encased in an industrial or domestic product.
For this reason students attention should be drawn to the need to operate the equipment
only in the manner prescribed in the accompanying documentation and supervisors must
make students aware of any particular risk. The equipment should not be operated by any
person alone.
We are required to indicate on our equipment panels certain areas and warnings that
require attention by the user. These have been indicated in the specified way by yellow
labels with black printing. The meanings of any labels that may be fixed to the instrument
are shown below:
CAUTION -
RISK OF
DANGER
CAUTION -
RISK OF
ELECTRIC SHOCK
CAUTION -
ELECTROSTATIC
SENSITIVE DEVICE
To Next Page
Loading...
Need help?
General
