feedback OMNIUM - User Manual

16” WHEEL20” WHEEL650c ROAD & 24” MTB
!
FOLDED UNFOLD LEGS LOCK LEG SUPPORT
A.
1.
A. B. C.
2.
3.
B. C.
DETATCH BUNGEES UNFOLD ROLLER ASSEMBLY UNFOLD ROLLER ASSEMBLY
29” MTB
[PORTABLE TRAINER]
PRODUCT MANUAL FOR:
OMNIUM
A
20” & 16”
700c ROAD, 26” & 27.5” MTB
This is how the Omnium Ships from the factory
Care and Maintenance
• After use, wipe down the Omnium trainer with a damp cloth with water to prevent corrosion; do not use any chemicals.
• Do not clean or degrease the bicycle while mounted to the Omnium as chemicals can cause damage to the trainer bearings or other internal components.
• The Omnium trainer roller bearings are sealed and do not require any maintenance or lubrication.
• To extend the life or your trainer, the Omnium trainer should be stored indoors, in a dry environment away from extreme temperatures.
IMPORTANT NOTES: Please Read Carefully
Before starting any exercise program, consult with your physician or health professional. He/she can establish an exercise frequency and intensity regimen for you, appropriate for your
age and health condition.
The Omnium Trainer is intended for use by people familiar with riding bicycles. Bicycles are sophisticated devices and should not be operated until/unless the user knows how
to operate the bicycle, and how to properly secure quick release skewers.
SETUP and SAFETY:
• ALWAYS check the safety and stability of the bicycle on the Omnium trainer before each use.
• Check all Omnium Trainer legs are fully open and braces are locked before each use.
• Check all Omnium Trainer Fasteners to ensure they are tight before each use.
• Check that the fork skewer is property adjusted and tightened on the fork before EVERY training session. Failure to properly secure and tighten the skewer may result in the
bike coming loose from the trainer and tipping over, possibly casing damage to the bicycle/trainer and/or possibly injury to the user.
• The Omnium Trainer is designed for use on a flat and level, non-slippery surface. It should not be used on an incline, slant, or uneven surface. Do not use the Omnium trainer on
soft ground, where one leg may sink into the ground or become uneven with the others. Make sure the underside of the rollers is not contacting the ground, carpet, or any other
item or obstruction.
• While riding the trainer, keep both hands on the handlebars at all times.
• Keep fingers and other objects away from moving parts of the trainer and bicycle.
• Children and pets should be kept clear from your bicycle and trainer during use.
GETTING ON and OFF:
• Please use caution when getting on the trainer. To mount the bicycle when it is affixed to the trainer by the fork mount, we recommend that you first stand close to the saddle of
the bicycle. Facing forward, place both hands on the handlebars and center your upper body over the bicycle. Place your outside foot on the pedal, lean forward putting weight on
the handlebars, and slowly swing your other leg over the rear tire and saddle of the bicycle and place your other foot on the pedal.
• Begin pedaling slowly at first and increase your speed gradually until you become familiar with the Omnium Trainer.
• Do not dismount from your bicycle until both pedals and rear wheel are completely stopped.
Should you have any questions or concerns with mounting the bicycle on the trainer, or getting onto the bicycle while affixed to the trainer please consult your local retailer or Feedback
Sports Tech Support 720.536.2369 or customerservice@feedbacksports.com).

Summary

Important Notes and Safety Precautions

General Safety and Setup

Check stability, leg positions, fasteners, and fork skewer before each use. Use on flat, level, non-slippery surfaces.

Safe Operation Guidelines

Keep hands on handlebars at all times, fingers away from moving parts, and keep children/pets clear.

Getting On and Off the Trainer

Use caution when mounting, stand close to saddle, center upper body, pedal gradually, and stop completely before dismounting.

Care and Maintenance

Wipe with damp cloth; avoid chemicals. Store indoors in a dry environment away from extreme temperatures.

Fork Configurations

Standard Quick Release (QR)

Standard fork skewer configuration for the trainer.

12 mm x 100 mm Thru Axle

Configuration for 12mm x 100mm thru axles using red end caps.

15 mm x 100 mm Thru Axle

Configuration for 15mm x 100mm thru axles using black end caps.

15 mm x 110 mm Thru Axle

Configuration for 15mm x 110mm thru axles using flipped black end caps.

Roller Distance Adjustment

Setting Roller Distance

Loosen Z-knob, set roller distance, and ensure tire contacts both rollers evenly, then tighten Z-knob.

Warranty and Support

Limited 3-Year Warranty

Covers manufacturing defects for original purchaser. Excludes wear, accident, misuse, or improper installation.

Return Authorization Process

Contact Feedback Sports for RA number and instructions. Include proof of purchase for warranty claims.

Liability Limitation

Sole remedy is repair/replacement. Feedback Sports not liable for incidental or consequential damages.

feedback OMNIUM Specifications

General

Brand	feedback
Model	OMNIUM
Category	Fitness Equipment
Language	English