Feelworld UHD4K12X - Version; Restore Default


Exit menu after modifying parameter to save it
3.3.7 Version
Move the pointer to the (VERSION) in the Main Menu, click the【HOME】and enter the
(VERSION) as follow
VERSION
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
MCU Version 3.2.0
Camera Version 1.0.0
AF Version 1.0.0
[Menu]Back
MCU Version: Display MCU version information
Camera Version: Display camera version information
AF Version: Display the focus version information
3.3.8
Restore Default
Move the pointer to the (VERSION) in the Main Menu, click the【HOME】and enter the
(VERSION) as follow.
RESTORE DEFAULT
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Restore Default? NO
[↑↓]Select [← →]Change Value
[Menu]Back [Home]OK
Restore default: Yes/No ;( after restoring default, the language, color, and video
format won’t be restored)
If the address of former remoter is not 1 but another one from
2,3,4,the corresponding camera address will restore to 1 when all parameters or
system parameters are restored. User should change the remoter address to be 1
(press No.1 according to the camera so to get normal operation)