EasyManua.ls Logo

Feider Machines FTDTR5220 - Fueling the Mower; Cutting Height Adjustment

Feider Machines FTDTR5220
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
FUEL
NOTICE: Engine delivered without gasoline, refuel
1.0 liter of before starting the engine.
Remove the filler cap
Add fuel to the bottom of the fuel level limit in the
neck of the fuel tank. Do not overfill. Wipe up spilled
fuel before starting the engine.
Tighten the fuel tank cap
Gasoline is extremely flammable, and gasoline vapor can
explode, causing serious injury or death. Use extreme
care when handling gasoline. Keep out of reach of children.
Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames
or sparks in the area where the engine is refueled or where gasoline is stored. Avoid
repeated or prolonged contact with skin or breathing of vapor.
After refueling, tighten the fuel tank cap securely. If any fuel was spilled, make sure the
area is dry before starting the engine.
Cutting Height Adjustment
Check the cutting height settings, and make any necessary adjustments. Pull then handle
and move it forward or backward to change the cutting height. There are 5 heights of
adjustment.
The blade can cause serious injury. Stop the engine
before adjusting cutting height.

Related product manuals