What to do if chips do not come out of the discharge chute of Feider Paper Shredder?
If the chips are not coming out of the discharge chute of your Feider Paper Shredder, or they are coming out slowly, first turn OFF the motor, disconnect the spark plug, and then clean out the machine if the discharge chute or hopper is clogged. Also, ensure that the throttle is set to FAST to provide sufficient motor RPMs.
Why is my Feider Paper Shredder engine not running smoothly?
If your Feider Paper Shredder engine is not running smoothly, ensure the choke is in the RUN position if the engine is warm. Clean the air filter. If these steps don't help, drain the fuel tank, clean out the fuel line, and fill the tank with fresh gas to address stale fuel, water, or dirt in the fuel.
Why is my Feider FBT220 Paper Shredder not chipping or shredding well?
If your Feider Paper Shredder is no longer chipping or shredding well, sharpen or replace the blades and check the hammers for damage. Additionally, replace or tighten the V-belt if it is loose, worn, or damaged.
What to do if my Feider Paper Shredder engine overheats?
If your Feider Paper Shredder engine overheats, clean off any chips and sawdust around the motor. Also, clean out the air filter.
Why is my Feider FBT220 vibrating?
If your Feider Paper Shredder vibrates or makes unusual noises, check the blades, hammers, impeller, and all connections for loose or damaged parts. Tighten, repair, or replace any parts as needed. Also, clean the impeller and blades if they have woody residue or chunks stuck to them.
General| Brand | Feider |
|---|---|
| Model | FBT220 |
| Category | Paper Shredder |
| Language | English |
To Next Page