To Next PageTo Next Page
Need help?Do you have a question about the Fein AMM 700 1.7Q Series and is the answer not in the manual?
General| Power Consumption | 450 W |
|---|---|
| Oscillations | 10, 000 - 19, 500 opm |
| Tool Holder | StarlockMax |
| Oscillation Angle | 2 x 2.0° |
| Cable with plug | 5 m |
| Sanding pad corner to corner | 80 mm |
Technical specifications including voltage, oscillation rate, weight, and sound levels.
Details on compatible battery types and their weights.
Icons indicating power status, modes, and prohibitions.
Illustrations related to battery, accessories, and handling.
Step-by-step guide for inserting the battery into the power tool.
Instructions for assembling the tool attachment.
Detailed steps for replacing application tools using different methods.
Explanation of the power switch and its operational states.
Visual indicators for speed settings or battery charge levels.
Illustrations of standard and specialized cutter blade types.
Illustrations of offset, U-shaped cutter blades, and the scraper knife.
Visual guidance on safe handling of the power tool.
Illustrations of accessories like batteries and chargers.
Explanation of common safety symbols and warnings.
Symbols indicating required personal protective equipment and operations.
Symbols for product certification and environmental disposal.
Combines general safety, intended use, and special safety instructions.
Details on units of measurement and vibration emission levels.
Guidance on managing hazardous dusts generated during operation.
Information on vibration emission levels and measurement standards.
Classification of application tools based on vibration emission.
Guidelines for proper battery operation, charging, and status indicators.
Details on product warranty coverage and legal liability.
Statement of product conformity and instructions for disposal.
