Fein FMM 250 User Manual

Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
Starting page

Fein FMM 250 Specifications

General

Brand	Fein
Model	FMM 250
Category	Cutter
Language	English

Summary

Technical Data

Electrical Function Test

Wiring and Connection Plan

Illustrates the electrical wiring and connection layout.

Safety Test Procedures

Outlines steps and requirements for performing safety tests.

Disassembly

Disassembly of Electronics

Instructions for disassembling electronic components.

Carbon Brushes and Holder Disassembly

Procedure for removing carbon brushes and their holders.

Armature Removal Procedure

Instructions on how to remove the armature.

Armature Bearing Replacement

Guide for replacing the armature bearing.

Field Magnet Removal

Steps to remove the field magnet.

Assembly

Switch Slide and Rod Assembly

Field Magnet Assembly

Armature Assembly Steps

Armature to Gear Head Assembly

Armature and Motor Case Assembly

Carbon Holder and Brush Assembly

Electronics and Cables Assembly

Case Cover and Clamping Piece Assembly