Fein ASCD18W2 - Page 7

7
en
level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration
such as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Intended use of the power tool:
Hand-held impact wrench for screwing in and
unscrewing screws and nuts in weather-pro-
tected environments without water supply
using the application tools and accessories
recommended by FEIN.
Sound emission ASCD18W2 ASCD18W2C ASCD18W4 ASCD18W4C
A-weighted emission pressure
power level measured at the
workplace L
pA
(re 20 μPa), in
decibels 86 86 86 86
Measuring uncertainty K
pA
, in
decibels 3 3 3 3
Measured A-weighted sound
power level L
wA
(re 1 pW), in
decibels 97 97 97 97
Measuring uncertainty K
wA
, in
decibels 3 3 3 3
C-weighted peak sound pressure
level measured at the workplace
L
pCpeak
, in decibels 109 109 109 109
Measuring uncertainty K
pCpeak
, in
decibels 3 3 3 3
Vibrations
Mean vibrational value for drilling
in metal
– m/s
2
– ft/s
2
6
20
6
20
6
20
6
20
Measuring uncertainty K, in
– m/s
2
– ft/s
2
1.5
4.9
1.5
4.9
1.5
4.9
1.5
4.9
REMARK: The sum of the measured emission value and respective measuring inaccuracy rep-
resents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
OBJ_BUCH-0000000122-001.book Page 7 Friday, April 19, 2013 10:39 AM