Fein Turbo II X - User Manual

Questions and Answers

K
Kim PowellAug 9, 2025
Why does my Fein Vacuum Cleaner have reduced suction?
- G
  Glenda GarciaAug 9, 2025
  Reduced vacuuming capacity in your Fein Vacuum Cleaner can stem from several causes: * The vacuum cleaner might not be fitted correctly; ensure the lid is properly mounted and both fasteners are completely shut. * The vacuum system could be clogged; clean the vacuum hose and extension tubes. * The fleece filter bag might be full; replace it with a new one. * The flat-fold filter might be full, so replace the flat-fold filter. * The disposal bag might be full; replace the disposal bag.
D
David JenkinsAug 14, 2025
What to do if my Fein Turbo II X Vacuum Cleaner has no suction when wet vacuuming?
- G
  Gina WashingtonAug 14, 2025
  If you experience no suction capacity when wet vacuuming with your Fein Vacuum Cleaner, the container might be full. Empty the container to restore suction.
C
Cheryl NguyenAug 19, 2025
How to stop dust from escaping my Fein Turbo II X while vacuuming?
- J
  juarezjenniferAug 19, 2025
  If dust escapes during vacuuming with your Fein Vacuum Cleaner, the flat-fold filter might be incorrectly positioned. Correct the mounting position of the flat-fold filter.
Y
Yesenia AllenAug 25, 2025
What to do if automatic filter cleaning (AC) is inoperative on my Fein Turbo II X?
- J
  Joseph BennettAug 25, 2025
  If the automatic filter cleaning (AC) is inoperative on your Fein Vacuum Cleaner, the vacuum hose may not be connected. Connect the vacuum hose.
J
Jesse MartinAug 29, 2025
How to fix a Fein Vacuum Cleaner that won't turn on?
- J
  Jasmine KingAug 30, 2025
  If your Fein Vacuum Cleaner won't switch on, here are a couple of things to check: * Ensure the power supply is working. The circuit breaker may have tripped. * If the vacuum cleaner is in remote control operation, set the operating-mode selector to “I”.
M
Marcus RiceSep 3, 2025
Why doesn't the automatic shut-off work on my Fein Turbo II X during wet vacuuming?
- Y
  youngrebekahSep 3, 2025
  If the automatic shut-off isn't responding during wet vacuuming with your Fein Vacuum Cleaner: * The sensors may be contaminated or dirty. Clean the sensors and their intermediate space using a brush. * If vacuuming electrically non-conductive liquids, the container might be full. Check the filling level and empty the container, if required.