IMPORTANT, RETAIN
FOR FUTURE
REFERENCE: READ
CAREFULLY
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic
precautions should always be followed.
THIS SMART WI-FI PLUG IS A “GROUNDED” DEVICE
DO NOT ATTACH A DEVICE THAT EXCEEDS
THE UNIT RATINGS
THIS PRODUCT IS NOT A VOLTAGE
CONVERTER
CAUTION: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
USE THIS
DEVICE WITH A RECEPTACLE IN
WHICH
THE SLOT OPENING DO NOT ALIGN
WITH THE BLADES
Power Button Manual Override:
Push this button if you do not have your smart device
and need to turn the plug ON or OFF
Blue = Device is connected
Flashing Blue = Device is ready to connect
TROUBLESHOOTING TIPS
If you are having difficulty connecting:
• Make sure the Wi-Fi network is a 2.4 GHz network.
Smart Wi-Fi Plug will not connect to a 5 GHz network.
• Test your Wi-Fi network with other devices such as your
phone to make sure it is operating properly.
• The Wi-Fi connection may not have good coverage
during set up. Try moving the Smart Wi-Fi Plug
closer to your Wi-Fi router.
• Your Wi-Fi network password is case sensitive, make
sure you are entering correctly.
Devices plugged into your Smart Wi-Fi Plug must be ON in
order to be controlled via the mobile app. Please also check
the App User Guide for more information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. - Consult the
dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY. This product is warrantied to be free from
defects in workmanship and materials for up to one year from date of
purchase. If the product fails within the warranty period, please
contact Feit Electric at info@feit.com, visit feit.com/contact-us or call
1-866-326-BULB (2852) for instructions on replacement or refund.
REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT
TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF
THIS WARRANTY. LIABILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY
EXCLUDED. Some states and
provinces do not allow the exclusion of incidental or
consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state
or province to province. Feit Electric Co.
4901 Gregg Road
Pico Rivera, CA
90660
www.feit.com
MODEL:
PLUG/WIFI
Smart Wi-Fi
Plug
Quick Install Guide
Feit Electric app
Works with
Only supports
2.4GHz Wi-Fi
networks
ELECTRICAL RATINGS:
120VAC, 60Hz, 15A
15A, Max. Resistive: 1875W
8A, Max. Tungsten: 1000W
To Next Page
Need help?
General
