6
Care and Cleaning
Troubleshooting
WARNING: Always make sure that the
product is off, not charging and cooled down before
attempting to clean it.
WARNING: If cord/plug or product Is
damaged or malfunctions in any manner, return the
product to the nearest authorized electrical service
center for repair or examination.
Servicing of product requires electrical knowledge
and should be done by only qualied personnel. Any
replacement parts for the product must be identical to
those parts in this product.
□ Clean the lamp head, lens cover and lamp stand
regularly with a non-abrasive cleaner.
□ Do not use a spray bottle to clean the product
□ Allow the work light to cool down completely before
storing.
□ Store in a safe place, out of the reach of children.
□ Do not place or set product where it can potentially fall
or be pull into a tub or sink.
□ Ensure the xture is properly plugged into the
power source.
□ Check to see if the light goes on by pressing the
power button.
□ The battery may be depleted. Allow the work
light to charge for at least 5 hours.
CLEANING THE LAMP
If the light does not work, check the following:
To Next Page
Loading...