Feiyue TecLime TIM-12

Questions and Answers

S
Sheila HuangAug 1, 2025
What to do if the Feiyue TecLime TIM-12 Ice Maker ice cubes stick together?
- K
  Karen AndersonAug 1, 2025
  If the ice cubes in your Feiyue Ice Maker are sticking together, it could be due to a couple of reasons. First, the ice making cycle might be too long. To resolve this, stop the ice maker and let the ice blocks melt, then restart it, selecting the small ice cube size. Alternatively, the water temperature in the inner tank might be too low. In this case, replace the water, ensuring its temperature is between 8-32°C.
C
Courtney SchmidtAug 8, 2025
What to do if the Feiyue TecLime TIM-12 Ice Maker "Add Water" indicator is on?
- J
  Julia PenaAug 8, 2025
  If the "Add Water" indicator is illuminated on your Feiyue Ice Maker, it signifies a lack of water in the unit. To resolve this, stop the ice maker, replenish the water supply, and then press the “ON/OFF” button to restart the ice maker.
T
tbishopAug 15, 2025
What to do if the Feiyue Ice Maker "Ice Full" indicator is on?
- K
  Kayla JonesAug 15, 2025
  If the “Ice Full” indicator is on for your Feiyue Ice Maker, it means the ice basket is full. Remove the ice from the basket. If you need to continue making ice even with the indicator on, you can continuously press the “Select” button for 5 seconds to allow the unit to run 10 more ice-making cycles.
T
Timothy RodriguezAug 23, 2025
Why is my Feiyue TecLime TIM-12 cycle normal but no ice is formed?
- C
  Christine EdwardsAug 23, 2025
  If your Feiyue Ice Maker's cycle appears normal but no ice is forming, there could be a few potential causes. The room or water temperature inside the inner tank might be too high; ensure the room temperature is between 5-40°C and the water temperature is between 8-32°C. If temperatures are within range, a qualified technician should verify the cooling system for refrigerant leaks or blocked pipes.

Summary

User Manual GB

Specification

Details the model, cooling capacity, refrigerant, voltage, power, weight, and dimensions.

Design

Illustrates and lists the key components of the ice machine, including shovel and basket.

Installation

Provides instructions for unpacking, positioning, and initial setup of the ice maker.

Safety Warnings

Crucial instructions for safe domestic use, avoiding hazards, proper handling, electrical safety, and maintenance.

Operation Instructions

Control Panel

Identifies and explains the function of each button and LED indicator on the control panel.

First Use Cleaning

Detailed steps for cleaning the ice machine before its initial operation.

Starting the Machine

Instructions on how to fill the water tank and start the ice making process.

Troubleshooting

Indicator Lights

Explains issues related to 'Add Water' and 'Ice Full' indicator lights and their solutions.

Ice Production Issues

Addresses problems like sticking ice cubes and no ice formation due to temperature or leaks.

Cleaning and Maintenance

Interior Cleaning

Instructions for cleaning the ice basket, interior surfaces, and draining the unit.

Exterior & Storage Cleaning

Guidelines for cleaning the exterior and preparing the machine for long-term storage.

Warranty Provisions

Warranty Terms

Outlines the 12-month warranty, exclusions, and conditions for repairs and replacements.

Environmental Protection

Disposal and Recycling

Provides guidance on proper disposal of electrical products and recycling advice.