To Next PageTo Next Page
Need help?Do you have a question about the Felker TM-75 and is the answer not in the manual?
General| Category | Tile Saw |
|---|---|
| Motor Power | 3/4 HP |
| Miter Angle Range | 0-45 degrees |
| Power Source | Electric |
| Voltage | 120V |
| No Load Speed | 3600 RPM |
| Water Reservoir Capacity | 1.5 gal |
| Arbor Size | 5/8 in |
| Blade Diameter | 7 in |
Carefully open container and check all saw components and packing materials.
Follow assembly instructions, connect parts, and tighten fasteners for the saw frame and powerhead.
Connect tubing, position pump in water tray, and secure it with mounting bracket.
Steps to safely remove and install the blade using wrenches and ensuring correct rotation.
Details the maximum cutting depth achievable with the 8" blade.
Provides troubleshooting advice for water pump issues like flow and clogging.
Verify the blade is centered in the conveyor cart slot for accurate cuts.
Adjusts the conveyor cart position to ensure the blade is centered in the slot.
