1110
SCALE CALIBRATION
approximately 3 seconds.
calibration weight for scale calibration in order to guarantee accuracy.
1. Follow instructions on the screen to complete scale calibration.
2.
response by turning the dial clockwise/counterclockwise and then
press the Dial or the Timer Button to confirm the selection.
3.
weight on the center of the scale weigh pan.
4. The screen will display an animation while the scale is going
through calibration.
5.
previous mode.
FACTORY RESET
1.
2. Press the Timer Button and the display will then show: Factory
3. Select the desired response by turning the dial clockwise/
counterclockwise.
4. Press the Dial or the Timer Button to confirm the selection.
• “No” returns to Brew Assist Mode.
•
5.
SERVICE
visit bit.ly/getfellowsupport to submit a request. If you still have
help.fellowproducts.com.
Do NOT mail the product back to the manufacturer or bring it to
a service center without first talking to a Fellow customer service
representative.
TWO-YEAR STANDARD WARRANTY
Fellow warrants this product against any defects that are due
to faulty material or workmanship for a two-year period after the
original date of consumer purchase.
This warranty is valid only for:
• The original consumer.
• Scales purchased through authorized retailers.
• Scales with the original sales receipt for proof of purchase.
This warranty does not include damage to the product resulting from:
•
• Operation with the wrong type of current or voltage.
• Failure to follow cleaning instructions for the scale.
• Failure to comply with any safeguards listed in the warnings and
instructions of this document.
help.fellowproducts.com to submit a request.
More info at Fellowproducts.com/pages/gear-guides
To Next Page
Loading...