jam occurs, press and
hold forward ( ) ke
until
the document is com
not cleared, press
reverse ( ) briefl
en your reservoir
needs re
LEARING THE OIL NOZZLES
Oil will s
steps 4 and 5 do not clear
out, remove several
sheets and re
eed
• All cross-cut shredders re
erformance. If not oiled, a machine ma
erience
diminished sheet capacity, intrusive noise when shreddin
and could ultimately stop runnin
. We
recommend that you re
ill the Auto Oil reservoir as instructed to avoid per
ormance problems.
• If shippin
shredder, oil must be drained. Open oil reservoir, pull out basket to access oil drain plu
suitable container under drain, remove plu
and let oil drain out. Replace plu
ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING
JAM PROOF SYSTE
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Automatically oils the cutters to enhance performance and extend shredder life.
Y
Stops shredder immediately when hands are too close to the openin
CLEANING AUTO-START INFRARED SENSORS
BA
aintenance is an important part o
protecting your investment. Don’t
orget oil and shredder bags.
C-480C Shredder plastic bag – #360580
Paper detection sensors are desi
ned for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causin
er detection sensors are located in the center o
Run shredder once a day in reverse
or 15 seconds to clear cutter
Empty wastebasket when bin full indicator li
ellowes is committed to giving our customers the support and service they deserve. That is why we o
ssistance and personal attention.
features an extensive on-line su
ort section with a number of self-service o
essionals are dedicated to resolve any o
e of manual for useful telephone numbers