Fellowes Corsivo User Manual

Corsivo™ Sit-Stand Workstation
1789 Norwood Avenue, Itasca, Illinois 60143
•
1-800-955-0959
•
www.fellowes.com
© 2019 Fellowes, Inc. | Part #411433
U.S.: 1-800-955-0959
Canada: 1-800-665-4339
Mexico: 001-800-514-9057
CUSTOMER SERVICE & SUPPORT
www.fellowes.com
PLEASE READ THESE INSTRUCTIONS BEFORE USE.
DO NOT DISCARD: KEEP FOR FUTURE REFERENCE.
LIRE CES INSTRUCTIONS AVANT UTILISATION.
NE PAS JETER: CONSERVER POUR FUTURE RÉFÉRENCE.
LEER ESTAS INSTRUCCIONES ANTES DEL USO.
NO DESECHAR: GUARDAR PARA FUTURA REFERENCIA.
Corsivo_411433_3L_031419.indd 14-1 3/18/19 12:48 PM

Fellowes Corsivo Specifications

General

Height adjustment range	28 - 390 mm
Maximum VESA mount	- mm
Minimum screen size	- \
Maximum weight capacity	17 kg
Number of displays supported	2
Material	Steel
Product color	Black

Weight and Dimensions

Depth	612.8 mm
Width	800 mm
Height	1143 mm
Weight	13430 g

Summary

Safety Instructions and Warnings

Setup Guide

Step 1: Initial Screw Attachment

Attach four M5x10mm pan head Phillips screws to threaded inserts for workstation assembly.

Step 2: Keyboard Platform Preparation

Apply foam pads to the keyboard platform and insert threaded inserts into the top surface.

Step 3: Attach Rubber Feet

Apply four rubber feet to the bottom of the workstation base and remove the plastic strap.

Step 4: Raise Workstation

With the workstation on a stable surface, engage the handle and raise it to the highest setting.

Step 5: Secure Keyboard Platform

Place the keyboard platform onto the workstation, align holes, and install four M5x10mm screws.

Step 6: Cable Management

Route cables using adhesive clips to ensure they are not pinched by support bars during motion.

Fellowes Corsivo Sit-Stand 3-Year Warranty