L
Leslie BrownJul 26, 2025
What to do if my Fellowes POWERSHRED DS-1 Paper Shredder doesn’t start?
- MMary WelchJul 26, 2025
If your Fellowes Paper Shredder isn’t starting, there are several things you can try: * Ensure the control switch is in the Auto-On position if SafeSense® is active. * If SafeSense® is not active, press and hold Alternate slowly back and forth. * Set the shredder to Off. * Remove any uncut paper. * Press and hold the Clear button. * Wait 20 minutes for the red light to turn off.