30
ENGLISH
4
STEPS TO BIND
21 3 4
1. Punch front and back covers first. 2. Punch sheets in small
batches that do not overload
the machine or the user.
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.
BEFORE YOU BIND
54
21 3
1. Check the green power neon
is on.
2. Select the correct comb
diameter using the comb
storage tray.
3. Insert the plastic comb into the
opening mechanism.
4. Pull comb-opening lever forward
to open the comb.
5. Test punch scrap sheets to check
edge guide setting.
To Next Page
Loading...
