Fellowes SB-99Ci - Basic Product Maintenance and Troubleshooting; Oiling Shredder; Cleaning Auto-Start Infrared Sensors; Preventive Maintenance

BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
5
ACCESSORIES
Maintenance is an important part of protecting your investment.
Don’t forget oil and shredder bags.
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
•Runshredderonceadayinreversefor15secondstoclearcutters
•Emptywastebasketwhenbinfullindicatorlightisilluminatedusingbag#36053
• Shredderwillnotfunctionifthepull-outbinisnotpushedallthewayin,orifbinneedstobeemptied.
•Whenshreddingforaprolongedperiodoftime,themotorcanbecomewarmandrequireacooldown
period. When this occurs the overheat indicator will alert you to the problem, this model will require 40
minutes to cool down.
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
•www.fellowes.comfeaturesanextensiveon-linesupportsectionwithanumberofself-serviceoptions
•Ourcustomerserviceprofessionalsarededicatedtoresolveanyofyourissues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
Shredderoil–#35250 SB-99Ci Shredder
plasticbag–#36053
LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to be free from
defects in material and workmanship for 7 years from the date of purchase by the original consumer.
Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for
2 years from the date of purchase by the original consumer. If any part is found to be defective during
thewarrantyperiod,yoursoleandexclusiveremedywillberepairorreplacement,atFellowes’option
andexpense,ofthedefectivepart.
This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED
WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall
Fellowes be liable for any consequential or incidental damages attributable to this product.
This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid
worldwide,exceptwheredifferentlimitations,restrictions,orconditionsmayberequiredbylocallaw.
For more details or to obtain service under this warranty, please contact us or your dealer.
WARRANTY
TO CLEAN THE SENSORS
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry).
1
Turn off and unplug
shredder.
Lift CD flap. Locate Auto-start
infared sensor.
2
Dip cotton swab in
rubbing alcohol.
Using cotton swab, wipe
away any contamination
from the paper sensors.
543
OILING SHREDDER
1 5
1 5
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry Press forward Shred one sheet
2
Press and hold forward ( )
2-3 seconds
5
3
4
1
•Allcross-cutshreddersrequireoilforpeakperformance.Ifnotoiled,amachinemayexperiencediminishedsheetcapacity,intrusivenoisewhenshreddingandcould
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
3