44
Maintenance
Every two years
Every year
Every 10,000 km
Every 5000 km
After 1,000 km
Items
Inspection
before riding
Check the motorcycle frame ● ●
Check the rocker arm ● ●
Check if nuts, bolts and fasteners are loose
○ ● ● ● ●
Check if rubber parts are damaged ○ ● ● ● ●
▲
Check if the rocker arm bearings can rotate
smoothly, and whether they are damaged
○ ● ● ● ●
Lubricate all moving parts and check their movement
○ ● ● ● ●
▲
Check if the motor pulley and gearbox pulley are damaged
∗
○ ● ● ● ●
▲
Check if the overall wiring harness is damaged
○ ● ● ● ●
▲
Replace the brake fluid of the front wheel brake
●
▲
Replace the brake fluid of the rear wheel brake
●
▲:Workthatmustbeperformed
○ :One-timecycle
● :Periodiccycle
I : Inspection is required (when necessary, cleaning, adjustment, lubrication or replacement should be done)
∗ : When replacing the belt, you need to replace the motor pulley and gearbox pulley at the same time. Similarly, when replacing the pul-
ley, you need to replace the belt as well. Otherwise, damage may occur again.