10
5. Technical data
Probe
Medium: non-corrosive gases
Measuring range: 0,5 to 20 m/s
Start-up code: 15.20
Connector: Lemo FCG.0B.305.CLCD52Z
Accuracy: 2,0% full scale plus 5% reading
Operating temperature: 0 to +120° C
Storage temperature: 65 to +150° C
Read out unit
Medium: non-corrosive gases
Unit of meas.: flow in m/s
Display: LCD 4 characters
Measuring rate: 2 values/sec.
Supply: Battery (1 x 9 Volt, size PP3)
Current consumption: approx. 15 mA
Battery life: approx. 12 hours
Case dimensions: 80x145x39 mm (ABS plastic)
Case protection: IP64 (splash water proof)
Weight: 230 g
Operating temperature: 0 to + 50° C
Storage temperature: -30 to + 80° C
Air humidity: 0 to 90% rh, non condensing
Standard: laser controlled wind tunnel
(Certificate in accordance with EN 45001)
Error diagnosis
E.01 = probe type not recognised
E.03 = over velocity measuring range
To Next Page
Loading...
