5
• Before starting a measurement, make sure you posi-
tion yourself in a stable position on a stable base.
• Always hold the instrument with two hands during
the complete measurement procedure, to avoid the
tool being snatched out of your hands.
• Do not bend over into the machine.
If you must, lean against a safety fence after checking its stability first.
• Do not ignore or remove safety constructions.
• Always follow the safety instructions that apply for the location
Please note:
Doing measurements on running paper machines is potentially
dangerous and requires alertness, concentration and common
sense.
The instruments of Feltest Equipment B.V. are designed and constructed
to be as safe as possible for their intended use. Nevertheless, it is the
user's responsibility to actually use the instruments in a safe way.
Feltest Equipment B.V. cannot be held responsible or liable in any way for
suffered injuries or damages that occurred while using their instruments.
4. About the instrument
The instrument contains high precision parts and therefore must
be treated with care.
The instrument is protected against dust and spray water.
However, avoid submerging the instrument in water and
avoid strong mechanical shocks.
To Next Page
Loading...
