To Next Page
J
Jay MannAug 20, 2025
What to do if Femi job Power Tool has no power supply voltage?
- KKurt PrattAug 20, 2025
If your Femi Power Tool has no power supply voltage, turn the disconnecting devices 'ON'.
What to do if Femi job Power Tool has no power supply voltage?
If your Femi Power Tool has no power supply voltage, turn the disconnecting devices 'ON'.
What to do if chips are not coming out of the hole when using the Femi job Power Tool?
If chips are not coming out of the hole when using the Femi Power Tool, extract the drill bit frequently to clear the chips.
What to do if the Femi job drill bit is blunt?
If the drill bit of your Femi Power Tool is blunt, sharpen it.
What to do if fuse tripped or circuit breakers faulty in Femi job Power Tool?
If the fuse has tripped or the circuit breakers are faulty in your Femi Power Tool, replace the tripped fuses and check the condition of the circuit breakers.
What to do if the Femi Power Tool drill bit is not lubricated?
If the drill bit of your Femi Power Tool is not lubricated, lubricate it.
What to do if the Femi job feeding speed is too slow?
If the feeding speed of your Femi Power Tool is too slow, increase the feeding speed.
How to fix incorrect belt tensioning in Femi job?
To fix incorrect belt tensioning in your Femi Power Tool, adjust the tensioning.
What to do if the shaft of my Femi job Power Tool is dry?
If the shaft of your Femi Power Tool is dry, lubricate it.
How to fix insufficient speed on Femi job?
To fix insufficient speed on your Femi Power Tool, change the speed.
What to do if the chuck pulley is loose on my Femi Power Tool?
If the chuck pulley is loose on your Femi Power Tool, check the tightness of the retaining nut on the pulley.
Identifies the NAME and MODEL of the drill press.
Declaration of compliance with EU directives and harmonised standards.
Details the safety devices: Movable inter-locked guard, Plexiglass chuck guard, Off button.
Covers residual risks, noise levels, and vibration information for safe operation.
Explains safety pictograms: CE plate, serial number, year of manufacture, read manual, use PPE.
Specifies intended use and lists reasonably foreseeable incorrect uses.
Details and illustrates the various parts of the drill press with a numbered list.
Lists components included in the package and provides installation warnings.
Advises on sufficient space for maintenance and cleaning.
Provides step-by-step visual instructions for installing the DP 12-941 model.
Provides step-by-step visual instructions for installing the DP 12-943 model.
Explains the importance of a stable workbench and how to secure the machine.
Details how to adjust the drilling surface to be right-angled with the base.
Warns about power supply connection compliance with local regulations.
Identifies the 'Off button' on the control panel.
Instructs to press the ON button to start the machine.
Details adjustments that can be made while operating the drill press.
Explains how to change tools, emphasizing opening the protection door first.
Advises using recommended speeds for the bit and material.
Details how to adjust the drilling surface height using levers and handles.
Illustrates the components involved in removing the chuck.
Explains how to align the drilling surface.
Details stopping the cycle and disconnecting the plug from the wall socket.
Provides a key for electrical components with multilingual translations.
General| Brand | Femi |
|---|---|
| Model | job Series |
| Category | Power Tool |
| Language | English |