Need help?Do you have a question about the Fender '57 Bandmaster and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power Output | 40 Watts |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 2 x 6L6 |
| Configuration | Combo |
| Rectifier | 5AR4 |
| Inputs | 4 (2 per channel) |
| Ohms | 4, 8, or 16 Ohms |
Protects the amplifier from electrical faults. Replace with specified type and rating.
Switches the amplifier power on or off.
Disables speaker outputs while keeping tube filaments warm for quicker warm-up.
Illuminates when the unit's power is switched on.
Adds high-end sparkle to the instrument tone.
Adjusts the overall tonal character of the amplifier.
Adjusts the volume level for the instrument inputs.
Adjusts the volume level for the microphone inputs.
Connect instruments; input 2 offers lower sensitivity for high-output sources.
Connect microphones or instruments; input 2 provides cleaner response.
Connect to a grounded outlet according to voltage and frequency specifications.
Connect speaker configurations to prevent amplifier damage.
Guidance on selecting, matching, and replacing amplifier tubes.
To Next Page
