Need help?Do you have a question about the Fender Champion 600 and is the answer not in the manual?
Follow all instructions, connect to grounded AC, avoid rain/moisture, and protect power cord.
Maintain air space behind unit, avoid heat sources, and use recommended carts/stands.
Refer servicing to qualified personnel and be cautious of high sound pressure levels.
High- and low-sensitivity plug-in connections for instruments.
Adjusts overall loudness, distortion, and sustain of the amplifier.
Turns AC power ON and OFF, indicated by the power jewel.
Connects internal speaker or a 4-ohm minimum external speaker cabinet.
Connect to a grounded AC outlet per specified voltage and frequency ratings.
Follow all instructions, connect to grounded AC, avoid rain/moisture, and protect power cord.
Maintain air space behind unit, avoid heat sources, and use recommended carts/stands.
Refer servicing to qualified personnel and be cautious of high sound pressure levels.
High- and low-sensitivity plug-in connections for instruments.
Adjusts overall loudness, distortion, and sustain of the amplifier.
Turns AC power ON and OFF, indicated by the power jewel.
Connects internal speaker or a 4-ohm minimum external speaker cabinet.
Connect to a grounded AC outlet per specified voltage and frequency ratings.
General| Output Power | 5 Watts |
|---|---|
| Preamp Tubes | 1 x 12AX7 |
| Power Tubes | 1 x 6V6 |
| Inputs | 1 x 1/4" |
| Controls | Volume |
| Weight | 15 lbs |
| Type | Tube Amplifier |
| Speaker | 6" Special Design |
To Next Page
