Need help?Do you have a question about the Fender '64 Custom Princeton Reverb and is the answer not in the manual?
General| Type | Tube |
|---|---|
| Power | 12 Watts |
| Channels | 1 |
| Reverb | Yes |
| Tremolo | Yes |
| Controls | Volume, Treble, Bass, Reverb, Speed, Intensity |
| Effects | Reverb, Tremolo |
| Speaker | 10" |
| Speaker Model Options | Jensen C-10R |
| Tubes | 3 x 12AX7, 2 x 6V6, 1 x 5AR4 |
| Cabinet Material | Pine |
Connect instruments here. Two inputs provide sweetened vintage frequency response.
Controls the overall volume level of the amplifier.
Adjusts high-frequency (Treble) and low-frequency (Bass) signal levels.
Controls the level of the reverb effect, can be toggled with footswitch.
Controls the rate and depth of the tremolo effect.
Illuminates when the amplifier is powered on.
Connects to a grounded outlet using the included power cord.
Provides electrical overcurrent protection for the amplifier.
Turns the amplifier on and off.
Connects internal and external speakers, specifying impedance requirements.
Connects the included two-button footswitch for effect control.
RCA jacks for connecting the output/input of the reverb pan.
To Next Page