Do you have a question about the Fender Classic Series 70s Stratocaster and is the answer not in the manual?
Neck, 70'S Strat Mex RW and 70'S Strat Mex MN options.
Disk component for neck tilt adjustment.
Set of tuning keys and associated mounting screw.
Bone nut for the guitar's headstock.
Components for guiding strings and spacing.
Nut and wrench for truss rod adjustment.
Plate used for mounting the guitar neck.
Ash body for the 70's Stratocaster.
Disk component for body tilt adjustment.
Button for attaching a guitar strap.
Pickguard for 70's Stratocaster W/B/W.
Vintage Stratocaster pickup assembly (3).
Control for Volume/Tone 250K (3) with nut and washer.
Tone and Volume knobs, and 5-way selector switch.
Capacitor and output jack components.
Tremolo arm, knob, claw, spring, and ferrule.
Vintage Stratocaster bridge assembly.
Wrench for adjusting saddle height.
Back plate for Vintage Stratocaster White.