Need help?Do you have a question about the Fender Dual Showman and is the answer not in the manual?
Adjusts overall loudness for Channel One, with a pull-for-boost feature.
Adjusts high frequencies for Channel One, with a pull-for-boost option.
Adjusts midrange frequencies for Channel One, with a pull-for-cut option.
Adjusts low frequencies for Channel One.
Connects instruments for Channel One, supports switching and dual-channel modes.
Connects instruments for Channel Two, supports switching and dual-channel modes.
Adjusts bias on output tubes using test points and a voltmeter.
Adjusts balance between amplifier sections using test points.
Transformer-coupled balanced output for slave amps or mixing consoles.
Checklist for diagnosing and resolving common amplifier operational problems.
Lists part number, dimensions, weight, power, impedance, and other technical data.
Adjusts overall loudness for Channel One, with a pull-for-boost feature.
Adjusts high frequencies for Channel One, with a pull-for-boost option.
Adjusts midrange frequencies for Channel One, with a pull-for-cut option.
Adjusts low frequencies for Channel One.
Connects instruments for Channel One, supports switching and dual-channel modes.
Connects instruments for Channel Two, supports switching and dual-channel modes.
Adjusts bias on output tubes using test points and a voltmeter.
Adjusts balance between amplifier sections using test points.
Transformer-coupled balanced output for slave amps or mixing consoles.
Checklist for diagnosing and resolving common amplifier operational problems.
Lists part number, dimensions, weight, power, impedance, and other technical data.
General| Year Introduced | 1963 |
|---|---|
| Power Output | 85 watts |
| Preamp Tubes | 7025/12AX7 |
| Power Tubes | 6L6GC |
| Channels | 2 |
| Speaker Output | 4 ohms |
| Dimensions | 10.5" |
| Inputs | 2 x 1/4" (per channel) |
To Next Page