Fender Frontman 25R User Manual

Frontman 25R Specifications
TYPE PR 225
PART NUMBER 22-1572 (100V)
22-1502 (120V)
22-1562 (230V)
22-1542 (230V) UK
22-1532 (240V) Aust
POWER 100V version: 100V AC, 50/60 Hz, 75W
REQUIREMENTS 120V version: 120V AC, 60 Hz, 75W
230V version: 230V AC, 50 Hz, 75W
240V version: 240V AC, 50 Hz, 75W
INPUT IMPEDANCE >1MΩ
NOMINAL INPUT LEVEL 100 mV
POWER OUTPUT 25W R.M.S.
RATED LOAD IMPEDANCE 8Ω
SPEAKER COMPLEMENT One 8Ω Special Design
10" Speaker (P/N 036502)
ACCESSORIES Optional Remote Single Footswitch
(P/N 002-8890-000)
DIMENSIONS Height: 15.5 in. 39.4 cm
Width: 17 in. 43.2 cm
Depth: 8.5 in. 21.6 cm
Weight: 25 lbs. 11.4 kg
WARNING: -NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.
-TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS AMPLIFIER TO RAIN OR MOISTURE.
-THIS UNIT MUST BE EARTH GROUNDED.
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
A PRODUCT OF:
FENDER
®
MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
Fender
®
, Strat
®
, ToneMaster
®
, Princeton
®
and Twin
Reverb
®
are registered trademarks of the Fender
Musical Instruments Corporation.
Frontman
™
and Prosonic
™
are trademarks of the
Fender Musical Instruments Corporation.
Product specifications are subject to change without notice.

Fender Frontman 25R Specifications

General

Power Output	25 Watts
Channels	2 (Normal and Drive)
Reverb	Yes
Type	Solid State
Speaker	10" Fender Special Design Speaker
Inputs	1/4" Instrument Input
Outputs	1/4" Headphone Jack
Controls	Gain, Volume, Treble, Bass, Reverb
Footswitch	Optional (for Drive channel)