FT-1 PRO CLIP-ON TUNER
USER MANUAL
Thank you for purchasing the Fender FT-1Pro Clip-On Tuner. This product features an easy-to-read
LCD screen with a central needle to indicate tuning accuracy. When a note is in tune, the needle will
move to the center of the screen and the backlight will turn green, giving a quick and easy visual
indication that you're in in tune. The dual hinge allows the tuner to be properly oriented, whether it's
mounted on the front or back of the headstock. The FT-1 is powered by a 3V button battery (CR2032).
SAFETY NOTICE
OVERALL
• Never use alcohol, gasoline or any other strong cleaning chemicals to clean the exterior of the
tuner or the LCD screen.
• Do not crush or strike the exterior as it may cause the unit to work improperly or malfunction.
BATTERY USE
• Conrm that polarity is correct when inserting a new battery. Proper polarity is indicated by a
negative symbol (-) marked on the battery tray.
• Remove the battery from the unit when not in use for extended periods of time.
• If the unit is not working properly, remove the battery and re-insert it after 10 seconds.
• If the LCD screen is hard to read or weakly lit, replace the battery with a new CR2032 battery.
• Dispose of the old battery properly.
FEATURES
LCD
Power/Mode
Button
Indicator needle
Battery cover
Clip
To Next Page
Need help?
General