Fender MUSTANG GT Series User Manual

MODIFYING PRESET EFFECTS TYPES
AMP
TYPE
FX
TYPE
PRESET NAME
FX
TYPE
Highlight effect to be modified in SIGNAL PATH LAYER, then press ENCODER ...
... then select modification from list
Effects can be bypassed, replaced, moved, added or deleted by pressing the ENCODER on the desired effect type.
Their individual settings can also be modified (see next page).
BYPASS: Select “BYPASS” from the list of options and press the ENCODER again. The SIGNAL PATH LAYER will then indicate that the
effect has been bypassed within the preset. To undo an effect bypass, follow the same steps.
REPLACE: Select “REPLACE” from the list of options and press the ENCODER. Select one the four effects categories that will
appear—Stomp Box, Modulation, Delay or Reverb—and press the ENCODER to access the effects in that category. Scroll through the
effects and press the ENCODER to select one as a replacement. The SIGNAL PATH LAYER will then display the new effect and indicate
that the original effect has been replaced.
MOVE: Select “MOVE” from the list of options and press the ENCODER. An orange box will appear around the selected effect name,
along with a blinking white arrow indicating that the effect is ready to be moved. Turn the ENCODER to reposition the selected effect; press
the ENCODER to place the effect in its new position.
ADD FX: Select “ADD FX” from the list of options and press the ENCODER. Select one the four effects categories that will appear and press the
ENCODER to access the effects in that category. Scroll through the effects and press the ENCODER to select an effect to add. A green box
will appear around the selected effect name, along with a blinking white arrow indicating that the effect is ready to be positioned. Turn the
ENCODER to position the selected effect; press the ENCODER to place the effect in its new position.
DELETE: Select “DELETE” from the list of options and press the ENCODER; the effect will be removed from the signal path and another
effect in use (if any) will shift into its place.
BYPASS
REPLACE
MOVE
ADD FX
DELETE

Fender MUSTANG GT Series Specifications

General

Footswitch	Optional (Sold Separately)
Bluetooth	Yes
USB	Yes
Headphone Output	Yes
Connectivity	Bluetooth, USB
Control	LCD Screen
Effects	Built-in effects (delay, reverb, modulation, etc.)