Need help?Do you have a question about the Fender Tone Master Deluxe Reverb and is the answer not in the manual?
General| Effects | Reverb, Tremolo |
|---|---|
| Power | 100W |
| Speaker | 1 x 12" Jensen N-12K Neodymium Speaker |
| Channels | 2 |
| Reverb | Yes |
| Inputs | 2 x 1/4" (normal, vibrato) |
| Outputs | 1 x XLR (line out) |
| Controls | Volume, Treble, Bass, Reverb, Speed, Intensity |
| Footswitch | 2-button footswitch (included) |
| Weight | 23 lbs (10.43 kg) |
| Power Attenuation | Yes (22.5W, 12W, 5W, 1W, 0.2W) |
Connect instrument to normal inputs. Input 1 offers full sensitivity; input 2 provides adjusted sensitivity.
Adjusts the overall volume level for both normal channel inputs.
Adjusts the treble frequency response for both normal channel inputs.
Adjusts the bass frequency response for both normal channel inputs.
Connect instrument to activate vibrato effect. Input 1 offers full sensitivity; input 2 provides adjusted sensitivity.
Adjusts the overall volume level for both vibrato channel inputs.
Adjusts the treble frequency response for both vibrato channel inputs.
Adjusts the bass frequency response for both vibrato channel inputs.
Controls the level of the reverb effect. Can also be toggled via footswitch.
Adjusts the rate (speed) of the vibrato (tremolo) effect.
Adjusts the depth of the vibrato (tremolo) effect. Can also be toggled via footswitch.
Illuminates to indicate amplifier status: red when on, flashing during warmup, amber in MUTE mode.
Connects the included power cord to a grounded outlet for universal 100V-240V operation.
Turns the amplifier on and off.
Mutes the power amp while keeping the XLR line output active for quiet stage or recording.
Selects full power (22 watts) or five attenuated settings to adjust room/venue loudness.
Offers flat output or two impulse response (IR) profiles emulating speaker/microphone combinations.
Adjusts the output level of the XLR BALANCED LINE OUTPUT for external devices.
Eliminates hum or buzz caused by improper grounding when using XLR output.
Provides a balanced connection to external devices and systems, active even in MUTE mode.
Connects the included two-button footswitch for controlling reverb and tremolo effects.
Located on underside for firmware updates, improving amplifier performance and features.
To Next Page