Need help?Do you have a question about the Fender ‘65 TWIN REVERB and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Output Power | 85 Watts |
| Speakers | 2 x 12" Jensen C12K |
| Reverb | Yes |
| Effects | Vibrato |
| Channels | 2 |
| Inputs | 4 (2 per channel) |
| Weight | 64 lbs (29 kg) |
| Controls | Volume, Treble, Bass, Reverb, Speed, Intensity |
| Cabinet Material | Plywood |
| Dimensions | 26.5" (67.31 cm) |
| Tubes | 4 x 6L6 |
| Footswitch | 2-button footswitch for Reverb and Vibrato |
Plug-in connections for instruments, Input 1 offers higher gain than Input 2.
Boosts high frequency response, noticeable at lower volumes.
Adjusts the overall loudness of the Normal channel.
Adjusts high frequency boost or cut for the Normal channel.
Adjusts mid-range frequency boost or cut for the Normal channel.
Adjusts low frequency boost or cut for the Normal channel.
Plug-in connections for instruments, Input 1 offers higher gain.
Boosts high frequency response, noticeable at lower volumes.
Adjusts the overall loudness of the Vibrato channel.
Adjusts high frequency boost or cut for the Vibrato channel.
Adjusts mid-range frequency boost or cut for the Vibrato channel.
Adjusts low frequency boost or cut for the Vibrato channel.
Adjusts reverberated signal level; can be toggled via footswitch.
Adjusts the speed of the vibrato effect.
Adjusts the intensity of the vibrato effect; can be toggled.
Indicates when the amplifier is receiving power.
Sets ground position to minimize hum or buzz.
Protects amplifier and operator from electrical faults.
Turns the AC power ON and OFF.
Turns amplifier on/off, reduces warm-up time for tubes.
Primary connection jack for speakers.
Connects external speaker in parallel with main jack.
Connects footswitch for remote control of vibrato/reverb.
Push on/off switch to activate or deactivate vibrato effect.
Push on/off switch to activate or deactivate reverb effect.
Minimizes speaker hum by adjusting a specific control.
Factory adjustment for tube bias, requires qualified technician.
Guidance on using the grounding type supply cord safely.
Lists the types and Fender part numbers for amplifier tubes.
Instructions for cleaning the amplifier's Tolex cabinet covering.
Steps to diagnose and resolve common amplifier operational issues.
Details on part number, dimensions, weight, power, impedance, and features.
To Next Page