Need help?Do you have a question about the Fender '65 Twin Reverb PR 186 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power | 85 Watts |
| Speaker | 2 x 12" Jensen C12K |
| Reverb | Yes |
| Tremolo | Yes |
| Weight | 64 lbs (29 kg) |
| Tubes | 4 x 12AX7, 2 x 12AT7, 4 x 6L6 |
| Inputs | 4 (2 per channel) |
| Channels | 2 |
| Effects | Reverb |
| EQ | Bass, Middle, Treble |
| Footswitch I/O | 1/4" |
| Controls | Volume, Treble, Bass, Reverb, Speed, Intensity |
| Dimensions | 10.5 inches (26.7 cm) |
| Outputs | 2 x Speaker |
Key safety guidelines to prevent damage, fire, and electrical shock hazards.
Description of inputs and tone controls for the normal channel.
Description of inputs, tone controls, reverb, speed, and intensity for the vibrato channel.
Details on the power indicator light and bulb replacement.
Explanation of power rating, fuse, main speaker, and external speaker connections.
Connection for the footswitch to control vibrato and reverb effects.
Procedure to minimize hum caused by tube filament imbalance.
Guidance for bias adjustment when output tubes are replaced.
To Next Page