Need help?Do you have a question about the Fender Mustang LT50 and is the answer not in the manual?
General| Power Output | 50 Watts |
|---|---|
| Speaker | 12-inch Fender Special Design |
| Amp Models | 20 |
| USB Connectivity | Yes |
| Type | Digital |
| Channels | 1 |
| Tuner | Yes |
| Presets | 60 |
| Headphone Output | Yes (1/8" Stereo) |
| Aux Input | Yes (1/8" Stereo) |
| Inputs | 1 x 1/4" |
| Effects | 20 (Reverb, Delay/Echo, Chorus, Tremolo, Flanger, Phaser, Overdrive, Fuzz, Compressor) |
| Outputs | USB, Headphone |
Provides a comprehensive guide to the Mustang LT50 amplifier's features and functions.
Details on GAIN, VOLUME, TREBLE, MIDDLE, BASS, MASTER VOLUME, DISPLAY WINDOW, ENCODER, TAP LIGHT.
Covers INPUT, AUX, HEADPHONE, USB, FOOTSWITCH, LINE OUT, and power connections.
Explains factory presets, user slots, and preset components.
How to select, customize, and restore presets.
How to view and modify amplifier model parameters within a preset.
Details on adjusting amp control knob settings via physical knob or encoder.
Instructions on how to save modified control settings.
How to save changes to the current or a new preset location.
Process for renaming presets during the save process.
How to replace an existing preset with a factory preset.
Steps to swap the amplifier model within a preset.
Comprehensive list of amplifier models and their descriptions.
Steps to navigate to and adjust individual effect parameters.
How to save changes made to effect settings.
Procedures for substituting or adding effects to presets.
Steps to remove an effect from a preset.
How to adjust delay time using the TAP button.
Using the footswitch for delay time adjustments.
Lists stompbox and modulation effect types with descriptions.
Lists delay and reverb effect types with descriptions.
Overview of tuner, footswitch configuration, and level controls.
Details on restoring defaults and viewing firmware information.
Methods for activating the chromatic tuner.
Understanding the tuner interface and readings.
Connecting the footswitch and setting up quick access presets.
Assigning presets to slots and activating them via footswitch banks.
Using the footswitch to toggle effects within a preset.
Using the footswitch to set delay times.
Activating the tuner function using the footswitch.
Understanding the footswitch tuner display and how to exit the mode.
Adjusting output levels for USB recording and mono line out.
Process for setting levels and using the signal meter.
How to restore the amplifier to its original factory settings.
Steps to start or abort the factory restore process.
How to check the current firmware version of the amplifier.
Details on the auxiliary input and headphone output jacks.
Information about the USB port for recording and Fender Tone app.
Details on the mono line output for external connections.
Overview of the Fender Tone desktop application and its features.
Technical specifications of the Mustang LT50 amplifier.
To Next Page