Need help?Do you have a question about the Fender Mustang GT100 and is the answer not in the manual?
General| Amplifier Type | Digital |
|---|---|
| Wattage | 100 Watts |
| Presets | 200 |
| Footswitch Included | No |
| Weight | 22 lbs |
| Effects | Yes |
| Inputs | 1 x 1/4" |
| USB | Yes (for firmware updates and recording) |
| Footswitch I/O | 1 x 1/4" (for optional footswitch) |
| Connectivity | Bluetooth, Wi-Fi |
| EQ | 3-Band |
| Reverb | Yes |
| Speaker | 1x12" Custom Celestion |
| Outputs | 1 x 1/4" (headphones), 1 x XLR (line out) |
Details the instrument input, control knobs, display window, layer buttons, encoder, and utility buttons on the amplifier's top panel.
Describes the power inlet, USB port, footswitch, line out, and FX send/return jacks on the amplifier's rear panel.
Covers modifying presets, saving edits, and renaming/saving new presets.
Details how to adjust amp model parameters using physical knobs or the controls layer.
Introduces methods for modifying, adding, or deleting effects within a preset's signal path.
Instructions for connecting to WiFi networks for firmware updates and other features.
Details Bluetooth pairing for audio streaming and app connectivity.
Explains the buttons, LEDs, and general layout of the MGT-4 footswitch.
How to assign and use three presets with the footswitch.
Guide to connecting and setting up the EXP-1 Expression Pedal for volume or parameter control.
Procedures for updating firmware and performing factory resets.
To Next Page
