Fender SHIELDS BLENDER User Manual

IMPORTANT SAFETY INSTRUCTIONS
•WARNING: To prevent damage, fire or shock hazard, do not
expose the unit or its AC power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified
personnel only.
•WARNING: The unit must only be connected to a safety agency
certified, regulated, power source (adapter), approved for use
and compliant with applicable local and national regulatory
safety requirements.
•Unplug AC power adapter before cleaning unit exterior. Use only
a damp cloth for cleaning; wait until the unit is completely dry
before reconnecting power.
•Amplifiers and loudspeaker systems, and ear/headphones (if
equipped) are capable of producing very high sound pressure
levels which may cause temporary or permanent hearing damage.
Use care when setting and adjusting volume levels during use.
A PRODUCT OF
FENDER MUSICAL INSTRUMENTS CORP.
345 CESSNA CIRCLE
CORONA, CALIF. 92880 U.S.A.
AMPLIFICADOR DE AUDIO
IMPORTADO POR: Fender Ventas de México, S. de R.L. de C.V.
Calle Huerta #279, Int. A. Col. El Naranjo. C.P. 22785.
Ensenada, Baja California, México. RFC:
FVM-140508-CI0 Servicio al Cliente: 01(800) 7887395,
01(800) 7887396, 01(800) 7889433
Fender
®
is a registered trademark of FMIC.
Copyright © 2023 FMIC. All rights reserved.
PN 7727213000 REV B
ADDITIONAL LANGUAGES
Manual available in additional languages at
www.fender.com/support
10

Fender SHIELDS BLENDER Specifications

General

Bypass	True Bypass
Power	9V DC Power Supply (Not Included)
Brand	Fender
Model	SHIELDS BLENDER
Controls	Blend
Input	1 x 1/4"
Output	1 x 1/4"