Fender SIXTY User Manual

EFFECTS RETURN JACK- This balanced jack inputs
signal to the Master Volume control which drives the
power amp section. It automatically disconnects the
preamp when used. This jack is useful with the effects
loop feature, or when using the KXR 60 as a slave
amp.
MASTER VOLUME CONTROL- This control adjusts the
level of the signal coming out of the preamplifier sec-
tion. This control is used in conjunction with the
Channel Volume control to set the overall sound level
of the amplifier. In order to maximize headroom and
minimize noise, instruments with low-level output will
require a high Channel Volume setting and a low
Master Volume setting, while other instruments will
require a lower Channel Volume and higher Master
Volume setting. It is recommended that the Master
Volume control be set as high as possible for maxi-
mum DELTACOMP
TM
compressor range.
TAPE IN JACK- Two RCA style jacks provide an input
for an unbalanced, mono signal from a tape player or
CD player. This signal is summed with the signal from
the preamp inputs and provides the user the ability to
play along with pre-recorded music.
HEADPHONE JACK- This jack allows the use of stereo
headphones for private listening. When this jack is
used, the internal speaker is disconnected. WARN-
ING: BE CAREFUL WHEN USING HEADPHONES, AS
EXCESSIVE VOLUME WILL DAMAGE YOUR HEAR-
ING.
POWER INDICATOR- When this LED is illuminated,
the KXR 60 is receiving power.
POWER SWITCH- This switch turns the KXR 60 On or
Off.
G.
H.
I.
J.
K.
L.

Fender SIXTY Specifications

General

Brand	Fender
Model	SIXTY
Category	Musical Instrument Amplifier
Language	English