Need help?Do you have a question about the Fender SANTA ANA OVERDRIVE and is the answer not in the manual?
Identifies all knobs, switches, LEDs, and jacks on the Santa Ana Overdrive pedal.
Explains the function of Level, Drive, Bass, Middle, Treble, and Presence knobs for tone shaping.
Details the function of Voice and FS Select switches for tonal voicing and boost operation.
Describes the Bypass and Boost footswitches and their interaction with bypass mode.
Details the Input Jack, Output Jack, and DC Power Connector for connecting the pedal.
Explains the Jewel Indicator, LEDs, Low Battery Indicator, and LED Kill Switch.
Provides essential safety instructions for preventing damage, fire, or shock hazards.
Lists key technical specifications including impedance, power supply, dimensions, and weight.
General| Type | Overdrive Pedal |
|---|---|
| Bypass | True Bypass |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Power Requirements | 9V DC |
| Controls | Drive, Tone |
| Power Supply | 9V DC |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Source | 9V DC adapter |
| Enclosure | Metal |
To Next Page