Need help?Do you have a question about the Fender BLUES DEVILLE and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power Output | 60 Watts |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 2 x 6L6 |
| Channels | 2 (Normal and Drive) |
| Reverb | Yes |
| Weight | 50 lbs (22.7 kg) |
| Effects Loop | No |
| Inputs | 2 |
| Controls | Middle, Bass, Treble, Drive, Volume, Reverb |
| Outputs | External Speaker Jack |
| Footswitch | Included (2-Button, Channel/Drive) |
Recommended sound settings for classic blues tones using middle or neck pickups.
Settings for a biting tweed tone with any pickup combination.
Settings for sweet solo tones, ideal for humbucking bridge or middle pickups.
Explains the dual-channel design, Normal and Drive, based on vintage circuits.
Details features like reverb, footswitch, and connection jacks for external gear.
Describes the 60-watt power amp and the vintage tweed construction.
Crucial safety warning regarding fire and shock hazards from moisture.
Describes the two input jacks with varying impedance and sensitivity for different guitars.
Explains the bright switch for treble boost and the volume control for the Normal channel.
Details the drive channel selection button and the gain control for overdrive.
Covers the LED indicator for the drive channel and the treble frequency adjustment.
Explains the bass control for low-frequency adjustment in both channels.
Details the middle frequency adjustment and overall volume in the Drive Channel.
Explains reverb amount and presence for high-frequency content and brilliance.
Details the connection for a remote footswitch to change channels and reverb.
Describes jacks for patching into effects or using external preamps/power amps.
Explains the power indicator light and the standby switch for tube warm-up.
Describes the main AC power switch for turning the amplifier completely off.
Details the specific Fender Special Design tubes used in the amplifier.
Explains connections for external speaker cabinets and the main speaker output.
Describes the fuse for protection and the grounding type line cord.
Provides basic steps to diagnose and resolve common amplifier issues.
Lists part numbers for different voltage versions and input impedance values.
Details power output, output impedance, and sensitivity for preamp and power amp.
Specifies power needs for voltage versions and details speaker types and quantities.
Provides physical dimensions and weight for both Blues De Ville and Blues De Ville 212 models.
Advises against user servicing, recommending qualified personnel for repairs.
Illustrates the signal path through the amplifier's various stages and controls.
To Next Page