Need help?Do you have a question about the Fender Rumble Bass and is the answer not in the manual?
General| Series | Rumble |
|---|---|
| Speaker | 1x12", 1x15", 2x10" (varies by model) |
| Channels | 1 |
| Inputs | 1x 1/4" (instrument) |
| Outputs | 1x XLR (line out) |
| EQ | 3-band (bass, mid, treble) |
| Effects | Overdrive (switchable) |
| Dimensions | Varies by model |
Details the voltage, frequency, and wattage requirements for operation.
Specifies the fuse types and voltage ratings for different versions.
Specifies the amplifier's power output and THD rating.
Adjusts the volume level for Channel A.
High impedance, high sensitivity plug-in connection for Channel A.
High impedance input for Channel A and/or B for switching or combining.
Selects between separate (SWITCH) or mixed (COMBINE) channels.
Adjusts the volume level for Channel B.
Adjusts the level of high frequencies in Channel B.
Adjusts the level of low frequencies in Channel B.
Adjusts the level of mid frequencies in Channel B.
Steps for adjusting bias and balance using voltmeter and oscilloscope.
To Next Page
