Fender Bullet Amp PR 241 User Manual

THE SOUND THAT CREATES LEGENDS
P/N 041526
Owner
,
s Manual
Bullet Amp
TYPE: PR 241

Fender Bullet Amp PR 241 Specifications

Power

power output	15 Watts
power requirements (120V version)	120 VAC 60 Hz, .28A Max
power requirements (230V version)	230 VAC 50 Hz, .14A Max

Audio Specifications

input impedance	Greater than 1 Meg Ohm
nominal input level	100 mV
rated load impedance	8 Ohms

Weight and Dimensions

height	31.4 cm
width	33.7 cm
depth	18.1 cm
weight	6.8 kg

Summary

Bullet / Bullet Reverb Sound Settings

Bullet / Bullet Reverb Front Panel Functions

INPUT

A high impedance, high sensitivity plug-in connection for instruments.

NORMAL VOLUME

Adjusts the overall loudness of the Normal Channel.

GAIN

Adjusts preamp amplification in Drive Channel for sustain and distortion.

DRIVE SELECT

Activates the Drive Channel.

DRIVE VOLUME

Adjusts the overall loudness of the Drive Channel.

TREBLE

Adjusts the amount of boost or cut in the high frequency range.

MID

Adjusts overall tone quality without affecting signal level.

BASS

Adjusts the amount of boost or cut in the low frequency range.

REVERB

Adjusts amount of reverberated signal mixed with original dry signal.

EXTERNAL SPEAKER

Output to an external speaker enclosure, disables internal speaker.

HEADPHONES

Output to headphones for private listening, disables speaker.

POWER INDICATOR

Indicates when the Bullet/Bullet Reverb is receiving AC power.

POWER SWITCH

Turns the AC power ON and OFF.

Bullet / Bullet Reverb Specifications