Fender Bullet Amp PR 241 User Manual

PART NUMBER: Bullet Amp Bullet Reverb Amp
120V VERSION: 22-6705 120V VERSION: 22-6706
230V VERSION: 22-6765 230V VERSION: 22-6766
INPUT IMPEDANCE: Greater than 1 Meg Ohm
NOMINAL INPUT LEVEL: 100 mV
POWER OUTPUT: 15 Watts R.M.S.
RATED LOAD IMPEDANCE: 8 Ohms
POWER REQUIREMENTS: 120V VERSION: 120 VAC 60 Hz., .28A Max.
230V VERSION: 230 VAC 50 Hz., .14A Max.
SPEAKER COMPLEMENT: One 8 Ohm Special Design 8” Speaker (P/N 025421)
DIMENSIONS: Height: 12-3/8” (31.4cm)
Width: 13-1/4” (33.7cm)
Depth: 7-1/8’ (18.1cm)
WEIGHT: 15lbs. (6.8kg)
SOUND: Unbelievable!!
WARNING:
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
Bullet / Bullet Reverb Specifications
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720

Fender Bullet Amp PR 241 Specifications

Power

power output	15 Watts
power requirements (120V version)	120 VAC 60 Hz, .28A Max
power requirements (230V version)	230 VAC 50 Hz, .14A Max

Audio Specifications

input impedance	Greater than 1 Meg Ohm
nominal input level	100 mV
rated load impedance	8 Ohms

Weight and Dimensions

height	31.4 cm
width	33.7 cm
depth	18.1 cm
weight	6.8 kg