Need help?Do you have a question about the Fender BRONCO 40 and is the answer not in the manual?
General| Power Output | 40 Watts |
|---|---|
| Type | Solid-state |
| Effects | Reverb, Delay, Chorus, Tremolo |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x 1/4" Speaker Output |
| Controls | Gain, Volume |
| EQ | 3-band EQ |
| Footswitch | Optional |
Step-by-step guide to advanced features on the Bronco 40 amplifier.
Understanding navigation and how to select, store, and recall presets.
Storing and recalling amplifier settings and effects as presets.
Details on how amplifier knobs function and interact with presets.
Explains how turning a knob makes it active until a new preset is selected.
Using the FX knob for effects and the COMP knob for compression levels.
Instructions on setting delay or modulation intervals using the TAP button.
Indicator for when compression is active and its effect on sound.
Details on the balanced line level output for connecting to consoles.
Adjusting effects level or channel volume by holding the EXIT button.
Using the built-in tuner mode with control panel LEDs.
Step-by-step guide to saving modified amplifier settings as presets.
Information on auxiliary input and headphone output connections.
Connecting and programming a 1-button footswitch for preset selection.
Connecting the amplifier to a computer via USB for advanced features.
Controlling the amp and accessing bonus features via FUSE software.
Restoring the amplifier to its original factory settings.
Updating the amplifier's firmware for improved operation or new features.
Resources for learning more about the Bronco 40 and music.
To Next Page
