FENDT 5270 C - Page 8

GENERAL INFORMATION
1-4 Operator's Manual Combines FENDT 5270-6300- EN - LA327184015 - 11/2007
Engine Identification
Fig. 4 and Fig. 5
The engine is identified by the type plate (1) in the
middle of the cylinder block.
The following information appears on the plate (1):
• Engine manufacturer
•Engine type
• Engine power and rated speed
• Engine serial number
• Valve clearance
• Injection timing (static)
• Idling speed
• 97/68 EC approval engine family code
• EPA 40 CFR 89 approval family code
• 97/98/EC approval number
• Name of the engine assembler.
The engine serial number is always stamped on the
cylinder block as illustrated (black arrows).
Cutting table identification
Fig. 6
The cutting table is identified by a metal plate
positioned on the left-hand side of the table body.
Fig. 4
Fig. 5
1
1
Fig. 6
Find manuals at http://best-manuals.com/search?&s=FENDT-327184015.PDF