FENDT 5270 C - Page 9

GENERAL INFORMATION
Operator's Manual Combines FENDT 5270-6300- EN - LA327184015 - 11/2007 1-5
Cab identification
Fig. 7
The type plate is located on the outside of the cab,
in the bottom left-hand corner.
Hydrostatic pump identification
Fig. 8
Identification of the hydrostatic pump is facilitated
by means of a plate located on the pump body front
part.
Hydrostatic motor identification
Fig. 9
Identification of the hydrostatic motor is facilitated
by means of a plate located on the motor body
lower part.
Fig. 7
Fig. 8
Fig. 9
Find manuals at http://best-manuals.com/search?&s=FENDT-327184015.PDF