1.6.5.1 Ultra-Low Sulfur Diesel
Sparks can cause a fire more easily with Ultra-Low
Sulfur Diesel (ULSD) than with other diesel types.
Equipment (for example hoses) you can use to
decrease the static ignition risk decrease in eect
with time and other conditions.
Ground the machine and bond the fuel equipment
correctly to decrease the risk of static ignition and
a fire. See the equipment manuals for the fuel
equipment for more information.
GUID-E707838B-F5D5-48F0-BF75-34B264F6453D-high.jpg [High]
Fig. 19
1.6.6 Engine maintenance safety
• Stop the engine before you do the maintenance
or repair work.
• Before you do the maintenance or repair work
on the electrical system set the battery primary
switch to OFF.
• Surfaces and components near and on the
engine are hot when the engine has operated.
• Always let the components that contain hot
fluid or gas decrease in temperature before you
touch or open them.
• Before you do work on the cooling system,
make sure that you:
- Read the manual for the correct procedure.
- Let the radiator become cool.
- Gradually open the radiator cap to release
the pressure in the system.
• Fuel, lubricants or coolant can cause injury to
your skin. Put on your personal protective
equipment if it is necessary.
• Discard all unwanted materials correctly. Make
sure that you obey all local laws when you
recycle or discard these items.
• It is necessary to replace some components
after you remove them, for example an O-ring.
Make sure that you always replace these
components and do not install them again.
• Only use the components and fluids that have
AGCO approval.
• After you do the maintenance, examine the
work to make sure that it is correct. For
example, do an inspection for leaks.
GUID-81A39ABC-001C-4617-A089-FC6F702EF934-high.jpg [High]
Fig. 20
GUID-5BBEAEAD-4451-484C-A34E-3F151A7F385D [V1]
GUID-8B2A9682-3A5D-4B82-9ADB-71E97A29CE38 [V1]
1. Safety
IDEAL Series Combine 35
ACX2738370
To Next Page
