Do you have a question about the Feniex C-4200-DL and is the answer not in the manual?
Input Voltage | 12V DC |
---|---|
Dimensions | 6.8" L x 4.3" W x 1.1" H |
Operating Temperature | -40 to 185 °F |
SAE Standard | J1113-11 |
Protection | Short Circuit |
Guidelines for safe operation and installation of Feniex products to prevent damage or injury.
Details the product warranty period and terms for Feniex Industries, Inc.
States Feniex Industries' disclaimer of responsibility for removal/re-installation costs.
Information on Feniex Industries' continued service for products after warranty expiration.
Legal notice regarding copyrighted material in the manual and Feniex products.
Copyright statement for Feniex products and accompanying documentation, prohibiting unauthorized copies.
Lists the items included in the product package with their quantities.
Provides technical details of the Feniex 4200 controller system including power, current, and inputs.
Details the various wig-wag flash pattern configurations available for lighting.
Specifies the physical measurements of the controller, keypad, and Bluetooth module.
Step-by-step guide for installing the unit using a swivel mount assembly.
Instructions for mounting the unit using the provided L-brackets to the controller.
Method for surface mounting the controller using a U-shaped bracket.
Instructions for connecting the 4200 controller to a computer via USB for programming.
Details on selecting and activating specific output ports within the programming software.
How to program slide switches or inputs to activate specific buttons in the software.
Using software to turn off activated buttons or functions, allowing for control of multiple outputs.
Programming lightbar functions using inputs, switches, or buttons for dynamic control.
Setting a timed duration for button activation or function execution, from seconds to hours.
Programming tones for Feniex 100W or 200W Storm sirens via the software interface.
Assigning audio tones to inputs, switches, or buttons for siren activation.
Configuring alternating tones for 200W Storm sirens to offset dual tone functionality.
Programming wig-wag patterns for lights connected to outputs 1 and 2.
Programming an input to override wig-wag with a steady signal for high beams.
Information on the in-line Bluetooth module for smartphone/tablet control of the 4200.
Details the minimum requirements for Android and Apple apps to control the 4200 via Bluetooth.