FV-2030T
FV-2030T Wireless Dual Band PCI Express Adapter
* Image may differ from actual product.
Fenvi Technical Support Information
ktt@ fenvi.cn 86-0755-83628485
FV-2030T
Thank you for purchasing a quality Fenvi Product.
Please register your product at
For complete warranty information and future support for your product.
www.fenvi.cn
Quick Installation Guide
Connect to a Computer
1. Screw the antennas to the Wi-Fi PCIe adapter
(FV-2030T).
2. Turn off your computer and unplug the power cord from
your computer.
3. Remove the side panel of the computer case. Carefully
insert the driver into the PCIe slot of the motherboard.
4. Put the side panel of the case back and reconnect the
power cord, then turn on your computer.
Install Driver and Utility
A: Insert the resource CD, browse the CD and double-click
Setup.exe
You can also download the driver and utility at www.fenvi.cn
B: The Wireless Setup Software will pop up. Click Install to
continue and follow the instructions to finish. Then restart
the computer to complete the installation.
Connect to Wireless Network
Join by Windows Wireless Utility
1. Click WiFi icon at the bottom right corner in Windows.
2. Select desired Wi-Fi network and click Connect.
3. If the network is unencrypted, you will directly connect to it.
If the network is encrypted, enter the password (network
security key) and then click Next to connect.
Install Success
R
Shenzhen fenvi Technology Co., Ltd
The antenna is External antenna, Antenna A gain: 5dBi, Antenna B gain: 5 dBi,
To Next Page
Need help?
General