10. Main menu
Press the MENU button on the remote control in order to display the following main menu,
which contains six items:
1. editing channel lists
2. installation
3. system settings
4. tools
5. entertainment
6. recording settings
11. Installation
The installation menu is used to set antenna installation parameters and to search for channels
on a satellite.
11.1 Antenna connection
Select one of the two available options, depending on your system. Two options are available: a
fixed antenna (a typical system with a single converter) and an antenna with a positioner. If you
have a Combo model is also possible to change the settings on the other head. It can work in
terrestrial mode (default) or digital cable. The possibility have only models 153Combo and
253Combo.
11.2 Satellite list
In this menu select the satellites that you want to use. Select a satellite by pressing the
up/down arrow keys. Mark by pressing OK. Each selected satellite will be accompanied by the
symbol. The remaining menu options will be available only for selected satellites.
18
To Next Page
Loading...
Need help?
General
